Providing the professional transportation service of bulk cargo, automobile ro-ro, machiner ro-ro & site operation service like storage, binding and so on. We will provide the best ro-ro transportation service according to the client’s request.

Process for Operation

= 1 \* ROMANI.Quotation (Take cars for example)

Booking fee

Ocean freight is divided to high TK. & low TK. according to thevehicle’s length. The high & low TK is confirmed by the actual ship, & it generally on basis of 2.1 meters as the cut-off rule, we should confirm with the carrier if around this rule. Compared with the high TK, it’s about USD10 lower about the rate for low TK

wharfage
Lower fare: cargo trailers at container port, such as no automatic departures, which are not self - opening under the trailer, plus take fare.
Freight shipment, such as a vehicle non - driving state, into the cabin, plus a fee."In the absence of any power can be non - motorized, dragged into the cabin.Note: Ma non - lease costs, on the dismount non - lifting is required to pay for and binding of reinforcement and cost.
Ma non - significant, but not recommended, because of need for a rental.
II. Congregation
1) prepare the vehicle fuel - - against the dock after the fuel stock can be normal travel50 kmdue to the lack of parking, and make sure the vehicle up and down the ramp when the normal fuel feeding.Winter, cold - weather diesels from the factory before plus - 20 or 30 more than diesel, diesel low temperature to avoid wax clogging of the oil passage after the vehicle cannot be started.ensure that the process of loading and unloading is not because of fuel problems - tion;
2) to ensure strength, toughness, and to ensure reliable braking of the vehicle, the vehicle can be started normally;
3) the apparent condition of the vehicle in a yard / ship when you are in good conditions; and the vehicle runs on an exterior of the cleaning.vehicle handling at container port, and at the rear - view mirror to the demolition of the cab or folded and put in a good, protective measures shall be taken to the outside of the vehicle, which hit a two - or three - degree of protective wax that is susceptible to rusting of the parts such as chassis systems, and / or the like coated with antirust wax with antiseptic;
4) To ensure the smooth shipment, each shipment before shipment to the field by service personnel at the wharf with the necessary guidance and assistance, such as vehicle defects rectified in time for the car itself defects had been on board the vehicle, irresponsible.
5) submitted to the Congregation of dynamic must be accurate and timely, as far as possible on - time;
6) Each vehicle with a front windshield and the inner right at each of the spare parts shall be labeled in the format annexed to the shipping marks;
7) Be informed of goods (including its Annex on the maximum length, width and height dimensions) so that the outer edge of the loading, and please inform the ground personnel, then tied and will scale with the site personnel to implement the vehicle size, if the dimension is greater than quoted size, freight to site the amount of data.Since the misinformation or intentionally deceptive customer size caused by increase of the size of the field, led the site to shift goods and produce additional expenses on account of the losses, will be the responsibility of the Customer."Hit time ruler to ask the customer to" determine contact with me - in - Charge of the Division;
8) box used in assoiation with vehicle must be locked with the lock, with the vehicle key together with the handover;
9), a reminder: in addition to the outer box used in assoiation with vehicle cannot have any spare parts, which is separate from, or attached to the vehicle body.Prior written confirmation of our company.Please request at the earliest possible date.
III. The customs declaration
To confirm in advance whether a license is needed and the inspection certificate.
IV. The bill of lading
Bill of Lading before the confirmation for the customer to provide vehicle information: the device identification number, vehicle chassis number, engine number, etc.

realistic pictures:


Precautions:

1, advance with the shipowner confirming the expected shipment with freight.
2. Confirmation of freight at the same time, pay attention.
3. The method of clause, most of which with respect to the liner.
4, if the sheet is then be drenched.
5. If the binding is generated, generally belong to the owner.
6, keeping the vehicle along with a significant shipment of the ordered state, in particular from the fastening point of view, should be adapted to marine transportation.In the fastened when, generally through the lateral fastening method.In addition, a very high center of gravity of the vehicle shall be loaded as far as possible to the position of roll is small.
7. If the goods belong to the cargo deck, cargo owner should pay attention to keep their eyes on the boat, for fear of being dumped as deck cargo.